Single Reduced Cold-Rolled Tinplate Coil

Single reduced cold-rolled tinplate coil refers to those steel coils where the steel substrate has been reduced to the desired thickness in a cold-reduction mill and subsequently annealed and temper rolled.

Product Description

Tin-plated steel coil, commonly known as tinplate coil is a steel product with a stampable thin steel coil as the base, tin plating on the surface, and multiple protective films. It has the characteristics of corrosion resistance, non-toxic, odorless, glossy surface, light weight, high strength. In addition, it is easy to weld and process, and has strong adaptability to ambient temperature. Single cold-reduced tinplate coil can be supplied with either a bright, silver, stone or matt finish, and the finish required shall be specified at the time of ordering. Single reduced cold-rolled tinplate coil is generally specified in nominal thicknesses that are multiples of 0,005 mm, from 0,150 mm up to and including 0,600 mm. It is widely used in food, beverage, grease, chemical, paint, paint, aerosol cans, bottle caps and many other daily necessities packaging.


Product Parameters

Product NameSingle Reduced Cold-Rolled Tinplate Coil
Thickness0.18mm-0.50mm
Width260mm-980mm
LengthSupport customization
Tin CoatingGeneral: 2.8g or 5.6g, can be produced according to your needs
Substrate TypeMR / SPCC / L / D
Reference StandardGB/T 2520, JIS G3303, JIS G3315, DIN EN 10202, DIN EN 10203

 

Surface State of Tinplate

Surface StateFeatures
Light SurfaceElectroplated tin smooth raw material strip after melting treatment to obtain the glaze,Smooth surface with very fine grindstone pattern
Stonetextured SurfaceElectroplating tin raw material with the glaze obtained after melting treatment,Grindstone pattern with certain direction
Silvercolor SurfaceElectroplating tin raw material with the glazed surface obtained after melting treatment, the surface is rough and dull
Mattless SurfaceThe surface of the substrate is rough and dull, and the tin plating layer is not soft melting

 

Substrate Type

Substrate TypeIntroduction
MRThe most general steel, steelmaking impurity residue less, excellent mechanical properties and corrosion resistance
LUsed for the production of acidic contents (oranges, yellow peaches, pineapples, etc.), and the inner surface of the food cans for iron high corrosion resistance tinplate substrate steel, such tinplate is often calledKPlate
DUsed to produce two pieces of high-processing tin plate substrate steel, such tin plate is often called.DIMaterial
SPCCChinese characteristics, using ordinary hot rollingSPHCProduces, usually used for miscellaneous tank purposes.

 

Coating Weight

ClassificationRepresentation of Tin Coating WeightTin Plating Nominal Weight (g/m2)Minimum Average Tin Plating Weight (g/m2)
Equal Tin Plating (E)1.1/1.11.1/1.11.8
2.2/2.22.2/2.24.0
2.8/2.82.8/2.85.0
5.6/5.65.6/5.610.5
Differentiated Tin Plating (D/A)2.2/1.12.2/1.12.0/0.9
2.8/1.12.8/1.12.25/0.9
5.6/1.15.6/1.15.05/0.9
2.8/2.22.8/2.22.25/2.0
5.6/2.25.6/2.25.05/2.0
5.6/2.85.6/2.85.05/2.25

 

Chemical Composition

No.CSiMnSPCuNiCrMo
D0.120.030.60.050.020.20.150.10.05
L0.130.030.60.050.150.030.040.060.05
MR0.130.030.60.050.20.20.20.10.05

 

Mechanical Properties & Applications

Standard NameNominal Hardness HR30TSStrong Yield MPAScope of Application
T-149230 /-50Drawing requirements, drawn ironing cans, nozzles, nozzles, closures
T-253245 /-50Ring and plug, dome, closure, shallow pull and special tank parts
T-2.555260 /-50Battery cell, small can cover and body
T-357275 /-50Cans and cans, large diameter caps, crown caps
T-3.559290 /-50Can body, closure and crown lid
T-461340 /-50Can body, closure and crown lid
T-565480 /-50Cans and cans

Product Show

CASE SHOW

  • Arctecture

  • Machinery Manufacturing

  • Oil And Gas

  • Transportation

    • Our Service

    Pre-sale Service

    √1. We provide samples free of charge, but the freight should be paid by the buyer.
    √2. We have full stock,and can deliver within short time.Many styles for your choices.
    √3. OEM and ODM order are accepted, Any kind of logo printing or design are available.
    √4. Good Quality + Factory Price + Quick Response + Reliable Service, is what we are trying best to offer you.
    √5. All of our products are produce by our professional workman and we have our high-work-effect foreign trade team, you can totally believe our service.

    After you choose

    √1. We will count cheapest shipping cost and make invoice to you at once.
    √2. Check quality again, then send out to you at 1-2 working day after your payment
    √3. Email you the tracking no, and help to chase the parcels until it arrive you.

    After-sale choose

    √1. We are very glad that customer give us some suggestion for price and products.
    √2. If any question,please contact with us freely by E-mail or Telephone.

    FAQ

    Q: Can you send samples?

    A: Of course, we can provide customers with free samples and express shipping service to all over of the world.
    Q: What product information do I need to provide?

    A: Please kindly provide the grade, width, thickness, surface treatment requirement should you have and quantities you need to purchase. 

    Q: It's my first time to import steel products, can you help me with it?

    A: Sure,we have agent to arrange the shipment, we will do it together with you.

    Q: What ports of shipment are there?
    A: Under normal circumstances, we ship from Shanghai, Tianjin, Qingdao, Ningbo ports, you can specify other ports according to your needs. 

    Q: What about product prices information?

    A: Prices various according to periodic price changes of raw materials. 

    Q: What is your terms of payment ?

    A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shipment or based on BL copy or LC at sight.

    Q: Do you provide custom made Products service?

    A: Yes,if you have your own design , we can produce according to your specification and drawing.

    Q: What are the certifications for your products?

    A: We have ISO 9001, MTC, third parties’ inspections are all available such SGS, BV ect.

    Leave A Message

    Requiredwrong format
    Requiredwrong format
    Requiredwrong format
    Required

    Related Products

    © Shandong Dingen Steel Group Co., Ltd. Rights Reserved